Type : ST - This type of coupling has through coupler and adaptor. It provides least resistance to flow.




Type : SSV - This type of coupling has self sealing (Non return) valve at coupler end and through adaptor. It is good for compressed air line. The coupler body should be installed on the up stream (supply) end of the line to shut off fluid/air supply when disconnected.

Type : SDV - This type of coupling has self - sealing (Non-return) valve at both coupler and adaptors ends. This is advantageous in oil / chemical line where media is costly.

 
 
Body Material : S.S.-304, 316, Brass, Carbon Steel & Aluminum.

Seal Material : Teflon, Viton, Silicon, Nitrile, Neoprene.

End Connections : Male, Female, Flange, Hose Shank

Size : 3 MM to 150 MM N.B.

Pressure : Upto 300 kg/cm2 depending upon size.

Temperature : 25. to 300. C

Operation : Q.R.C. work on a simple principal of "Push and Pull". The adaptor when pushed into the coupler, it is securely held by the self locking arrangements, resulting in a positive and leak proof connections. This action simultaneously opens the valve and the fluid flow starts. To disconnect, pull back the sleeve of the coupler, the adaptor ejects out and the valve is shut off automatically.

Application : Widely used for Air, Gas, Water, Steam, Oil, Chemicals in Fertilizers, Petroleum, Aerospace, Refrigeration, Chemical, Pharmaceuticals, Textile Industries etc.		  
 

CAMLOCK (LEVER LOCK) COUPLINGS
 
 
 

Handling of flexible hoses in plant involves frequent connection / disconnection of hoses with pipe lines, vessels, equipments, pump, tankers etc. Conventional flange / screwed fittings of hoses leads to lots of down time. Also flange / screwed ends if not connected properly, will result in leakages leading to wastage of materials and safety hazard.

With quick on Leverlock (Camlock) coupling, changing over of hoses from place to place in plant can be done in seconds with utmost perfection even by unskilled operator. Unique lever design ensures positive locking even as line pressure increases. The leak proof performance of joint is ensured even during abuse / vibration etc. caused during working.

Sizes : 1/2 " to 8 "

Pressure upto 35 kg/cm2 depending upon size

Material of Construction : Carbon Steel, Stainless Steel, Gun Metal, Aluminum etc.

Application : Chemical, Fertilizers, Petrochemicals, Dairy, Mining, Atomic Energy, Oil and Gas, Petroleum, Paint and Dyestuff, Pharmaceuticals, Food etc.

 
       
     
  Site Best viewed in IE 5.5 and above at 800 x 600
  
  Website Designer: Webcraft (Mumbai)